Your Location:  Home > Products > Glass Mould Brick >
Glass Mould Brick

Glass Mould Brick

Cold Crushing Strength :≥10 Mpa

Cold Bending Strength :≥1.5 Mpa

Permanent Linear Change(%) 1000℃X24h:≤0.5

Thermal conductivity 350±10℃:≤0.35(W/m.k)

Bulk Density:≥1.0(g/cm3)

Grain Size :≤200 (mesh)



Get a Quotation Send Message

Overview

With the development of the world automobile industry in recent years the technology on rearview mirror is also greatly improved, as demands a higher request on mold bricks in terms of its performance and quality. We have been working on the research and development. of Mold Bricks since 2000, and in March 2003 success was achieved in the trial manufacture, in Sep 2003 a Mold Brick production line was established, and we are now a factory specialized on Mold Brick for Viewing Mirrors.

 

 MD Mold Bricks characterize as follows: 

1. Low permanent linear change on reheating
Firing under the temperature of 1050 Degree. Ensures no distortion and no permanent linear change on the mold bricks.
2. High dense structure
MD Mold Brick is manufactured from micron grade material, which is pressed molding following being mixed by high speed blender. The maximum rod is 1000 with extremely fine section structure. 3. Good Thermal Shock Stability. 
No cracks even chap would be happening after long service of the bricks
4. Easy to be machined
The Mold Brick is manufactured based on the customer request, which avoids waste from cutting of the big blocks. 
We have established good fame among our customers since our mold brick line was put into production with some performances superior to similar products available in the market. 

MD mold bricks could also be used in thermal bending glass, thermal melting glass and art glass. We sincerely welcome the comments from all our customers.

Technical Data

No. L(mm) W(mm) H(mm)
1 450 250 25-150
2 450 320 25-150
3 300 300 25-150
4 380 300 25-150
5 510 270 25-150
6 510 510 25-150
7 440 360 25-150
8 600 480 25-150
9 500 380 25-150

Besides the specifications as listed above we meet your satisfaction based on customer requests, any problem don’t hesitate to contact us Physical and chemical index

Item Behaviors
TY-MD
Typical Chemical Composition % Al2O3 ≥25
Fe2O3 ≤1.5
Cold Crushing Strength Mpa ≥10
Cold Bending Strength Mpa ≥1.5
Permanent Linear Change(%) 1000℃X24h ≤0.5
Thermal conductivity 350±10℃(W/m.k) ≤0.35
Bulk Density(g/cm3) ≥1.0
Grain Size (mesh) ≤200

Inquiry

If you have any needs our help or are interested in our products, you can click online advisorychat with us online, or call our customer service telephone: 0086-0371-63838939. We will sincerely serve for you!

Title:
Name:
Tle:
* E-mail:
Country:
* Message: