Glass Mould Brick

Cold Crushing Strength:≥10 Mpa

Cold Bending Strength:≥1.5 Mpa

Permanent Linear Change(1000℃X24h):≤0.5%

Thermal conductivity 350±10℃:≤0.35（W/m.k)

Bulk Density:≥1.0 g/cm3

Grain Size:≤200 mesh

Email:sales@sunriserefr.com

Get a Quotation Send Message

Overview

With the development of the world automobile industry in recent years the technology on rearview mirror is also greatly improved, as demands a higher request on mold bricks in terms of its performance and quality. We have been working on the research and development. of Mold Bricks since 2000, and in March 2003 success was achieved in the trial manufacture, in Sep 2003 a Mold Brick production line was established, and we are now a factory specialized on Mold Brick for Viewing Mirrors.

► MD Mold Bricks characterize as follows:

1. Low permanent linear change on reheating
Firing under the temperature of 1050 Degree. Ensures no distortion and no permanent linear change on the mold bricks.
2. High dense structure
MD Mold Brick is manufactured from micron grade material, which is pressed molding following being mixed by high speed blender. The maximum rod is 1000 with extremely fine section structure.
3. Good Thermal Shock Stability
No cracks even chap would be happening after long service of the bricks.
4. Easy to be machined
The Mold Brick is manufactured based on the customer request, which avoids waste from cutting of the big blocks.
We have established good fame among our customers since our mold brick line was put into production with some performances superior to similar products available in the market.

MD mold bricks could also be used in thermal bending glass, thermal melting glass and art glass. We sincerely welcome the comments from all our customers.

Technical Data

No.	L(mm)	W(mm)	H(mm)
1	450	250	25-150
2	450	320	25-150
3	300	300	25-150
4	380	300	25-150
5	510	270	25-150
6	510	510	25-150
7	440	360	25-150
8	600	480	25-150
9	500	380	25-150

Besides the specifications as listed above we meet your satisfaction based on customer requests, any problem don’t hesitate to contact us Physical and chemical index

Item		Behaviors
		TY-MD
Typical Chemical Composition (%)	Al₂O₃	≥25
	Fe₂O₃	≤1.5
Cold Crushing Strength (Mpa)		≥10
Cold Bending Strength (Mpa)		≥1.5
Permanent Linear Change(1000℃X24h) (%)		≤0.5
Thermal conductivity 350±10℃(W/m.k)		≤0.35
Bulk Density (g/cm³)		≥1.0
Grain Size (mesh)		≤200

Inquiry

sales@sunriserefr.com
0086-371-63838939
TOP

If you have any needs our help or are interested in our products, you can click online advisorychat with us online, or call our customer service telephone: 0086-0371-63838939. We will sincerely serve for you!