News Center_Zhengzhou Sunrise Refractory

News Center

$Refractory Corrosion and Glass Defects$

15-07-02
Refractory Corrosion and Glass Defects

The refractory materials used in glass furnaces are exposed to high temperature and mechanical corrosion during the operation, which results in corrosion of refractories and glass defects. ...
$The Application Of Zirconia Refractories In Glass Furnaces$

15-06-03
The Application Of Zirconia Refractories In Glass Furnaces

Zirconia is useful refractory material for glass furnaces primarily since it is not easily wetted by molten glass and because of its low reaction with them. Therefore, zirconia refractories are widely used in glass furnaces, especially in th...
$Physical Properties Of Refractory Materials: Porosity$

15-05-20
Physical Properties Of Refractory Materials: Porosity

Porosity is a measure of the effective open pore volume in the refractory into which the molten metal, slag, fluxes, vapors etc can penetrate and thereby contribute to eventual degradation of the structure. ...
15-05-11
Aluminum brick production process

Alumina bricks are alumina content of 48% neutral refractories, good thermal stability, refractoriness over 1770 degrees. Slag resistance is better. For masonry steelmaking furnace, glass furnaces, cement rotary kiln. Similar alumina bricks...
15-05-11
Insulation brick construction process

1, insulation bricks before clamping should first make insulation bricks in a stable position to be caught in the jaws clamp insulation brick center line. 2, remove and place for insulation tiles should be smooth and free of debris. When the...
15-05-11
Alumina bricks of Properties and Uses

High load soft. Low creep high alumina brick is super bauxite. Fused alumina, fused mullite refractory advanced as the main raw material. The product has a high temperature creep is small. Corrosion resistance. And good thermal shock resista...
$Preparation of refractory brick of water consumption$

15-05-11
Preparation of refractory brick of water consumption

Water consumption and nature of raw materials, mixing ratio, particle size distribution of raw materials, digestive way, PRESS model and so on. For example: When using cinder as fine aggregate, would need a large amount of water: When using...
$Refractory brick drying process billet crack reason$

15-05-11
Refractory brick drying process billet crack reason

About refractory brick drying process to produce billet crack basic reasons related content to bring you, interested in this knowledge friends do not miss. 1, humidity control is not good, the temperature kiln drying of each segment is no re...
15-05-11
The best composition of corundum brick

The best corundum content greater than 90% alumina brick , corundum refractory products based crystalline phase. High compressive strength at room temperature (up to 340MPa). High load softening start temperature (greater than 1700 ℃). Goo...

Home
Pre
22
23
24
25
26
27
End

Send an Inquiry

Phone : +86-371-63838939 / Fax:+86-371-63835539

Company Address : No.36 Fengchan Road Of Zhengzhou, Henan, China (Mainland)

If you have any needs our help or are interested in our products, you can click online advisorychat with us online, or call our customer service telephone: 0086-0371-63838939. We will sincerely serve for you!